Kress KG346.9 handleiding
Handleiding
Je bekijkt pagina 10 van 60
10
EN
is evenly distributed on both feet. When possible,
the log should be raised and supported by the use
of limbs, logs or chocks. Follow the simple
directions for easy cutting.
When the log is supported along its entire length
as illustrated in Figure 3, it is cut from the top
(overbuck), avoid contacting ground as this will
greatly reduce the chain sharpness.
3
2
2
W
Y
Z
X
50mm
50mm
1
1
1
2
2/3
1
1/3
1
2
2/3
1/3
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
When the log is supported on one end, as
illustrated in Figure 4, cut 1/3 the diameter from
the underside (underbuck) (1). Then make the
nished cut by overbucking (2) to meet the rst
cut.
3
2
2
W
Y
Z
X
50mm
50mm
1
1
1
2
2/3
1
1/3
1
2
2/3
1/3
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
When the log is supported on both ends, as
illustrated in Figure 5, cut 1/3 the diameter from the
top (overbuck) (1). Then make the nished cut by
underbucking (2) the lower 2/3 to meet the rst cut.
3
2
2
W
Y
Z
X
50mm
50mm
1
1
1
2
2/3
1
1/3
1
2
2/3
1/3
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
When bucking on a slope always stand on the
uphill side of the log, as illustrated in Figure 6.
When “cutting through”, to maintain complete
control release the cutting pressure near the end of
the cut without relaxing your grip on the Chainsaw
handles. Don’t let the chain contact the ground.
After completing the cut, wait for the saw chain to
stop before you move the Chainsaw.
Always stop the motor before moving from tree to
tree.
3
2
2
W
Y
Z
X
50mm
50mm
1
1
1
2
2/3
1
1/3
1
2
2/3
1/3
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Bekijk gratis de handleiding van Kress KG346.9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kress |
| Model | KG346.9 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8539 MB |