Handleiding
Je bekijkt pagina 7 van 19
Kramer Electronics Ltd.
WM-8P – Installation Guide
5
Wiring the Speakers – best practice
Your passive speaker features both low impedance (8Ω) and high impedance (70V/100V)
modes. Understanding the difference is essential for safe installation and optimal
performance.
Low Impedance Installation (8 Ohms)
Description:
In low impedance setup the speaker is connected directly to a low-impedance amplifier
(typically rated at 4Ω, 8Ω, or 16Ω). This method is commonly used in small to medium-sized
rooms where the amplifier is near the speakers, such as meeting rooms, boardrooms, or
home studios.
Note: In low impedance mode the WM-8P has an impedance of 8Ω.
Key Features:
• Higher sound quality due to full-range signal.
• Limited cable runs (usually less than 20 meters).
• One amplifier channel per speaker or a pair of speakers.
High Impedance Installation (70V / 100V)
Description:
This method uses a transformer to distribute audio over long distances using thin speaker
cables. Ideal for large areas or multi-speaker installations such as retail stores, restaurants,
schools, or outdoor spaces.
Key Features:
• Supports multiple speakers on a single amplifier channel, installed in parallel.
• Long cable runs (up to hundreds of meters) without significant loss.
Note:
In high impedance mode the WM-8P supports the following power ratings:
o at 100V – 60W / 30W / 15W
o at 70V – 60W / 30W / 15W / 7.5W
Bekijk gratis de handleiding van Kramer WM-8P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | WM-8P |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2809 MB |
