Handleiding
Je bekijkt pagina 12 van 19
Kramer Electronics Ltd.
PN-6P – Installation Guide
10
Setting up speaker power handling mode
Your speaker includes a rotary transformer tap for setting the power handling mode.
To set the speaker to 8Ω low impedances, set the transformer tap so the 2 arrows will point at
the 8Ω markings as shown in the picture:
To set the speaker to a high impedance mode set the transformer tap to the desired power
rating as shown in the picture. In this example, if the speaker will be connected to a 100V line
its power rating will be 30W and if connected to a 70V line its power rating will 15W.
Always power off the amplifier before changing transformer tap settings or connecting the
terminal connector to the speaker
Always check amplifier compatibility before connecting (impedance setup, power ratings)
Verify that the polarity of the wiring at the amplifier side and at all the speaker is correct, we
recommend using color coding: red for + and black for
-.
Bekijk gratis de handleiding van Kramer PN-6P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | PN-6P |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2659 MB |
