Handleiding
Je bekijkt pagina 9 van 39
Kramer Electronics Ltd.
KT-2015 / KT-2015WM – Mounting the KT-2015 / KT-2015WM
9
Mounting the KT-2015 / KT-2015WM
The KT-2015 package is for mounting the touch panel on a table and the KT-2015WM package is
for mounting the touch panel on a wall.
Always be careful when attaching or removing the 15" Touch Panel from a mount.
Mounting KT-2015 on a Table
Mount KT-2015 on a table:
• Moveable Mount: Place the tabletop mount on the table. Connected cables remain visible
and the table remains intact.
• Secure Mount: Bolt the tabletop mount into the table. Connected cables are hidden through
a hole in the table.
1. Connect any cables.
Device will power on when PoE or DC is connected.
2. Install the I/O cover.
▪ Close with the M2*8 screws (qty 2).
3. Attach the VESA bracket.
1. Lay the tablet face-down.
2. Insert and tighten the 4 provided
screws M4*8 (qty 4).
4. Insert the stand into the VESA bracket.
▪ The VESA bracket has 3 slots, each slot
attaches the stand at a different angle:
The top slot is 30°, the middle 45° and the
bottom 60°.
▪ Choose the slot you want to use (top, middle or
bottom) and insert the stand.
Bekijk gratis de handleiding van Kramer KT-2015WM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | KT-2015WM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6091 MB |
