Handleiding
Je bekijkt pagina 4 van 39
Kramer Electronics Ltd.
KT-2015 / KT-2015WM – Introduction
4
Safety Instructions
This unit is intended to be supplied by:
• UL / IEC 62368-1 certified Class II power adapter suitable for use at an ambient temperature of 40°C
and altitude of 5,000 m whose output meets ES1, and is rated 12 V DC, minimum 3 A.
• UL / IEC 62368-1 certified PoE output power supply suitable for use at an ambient temperature of 40°C
and altitude of 5,000 m whose output meets ES1, and is rated 44-57 V DC, minimum 0.6 A.
Caution:
• This equipment is to be used only inside a building. It may only be connected to other equipment
that is installed inside a building.
• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an
external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
• Risk of explosion if the battery is replaced by an incorrect type. Wait one-half hour after
switching off before handling parts.
Warning:
• Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel
only.
• Use only PoE or the optional power adapter that is supplied with the unit.
• When using the optional power adapter, unplug it before installing the unit.
Laser Safety:
• This product complies with FDA performance standards for laser products except for
conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
• Date of manufacture: The date code at the bottom of the product label represents the
manufacturing date of this laser product.
Caution: Invisible laser radiation when open. Avoid exposure to beam. Class 1 laser product. This
system must be opened only by qualified technicians to prevent accidents caused by the laser
beam.
Caution: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
The ambient light sensor can automatically adjust panel brightness based on the environment.
See Display Settings to enable automatic brightness.
The Laser proximity sensor will detect nearby motion to wake the panel up without requiring a touch.
Bekijk gratis de handleiding van Kramer KT-2015WM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | KT-2015WM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6091 MB |
