Handleiding
Je bekijkt pagina 10 van 20
Kramer Electronics Ltd.
CL-4P – Installation Guide
8
When to Use high impedance 70V/100V Line Systems
Use a 70V (North America) or 100V (ROW) system when:
• Long Cable Runs (Typically >50–60m)
In low-impedance systems, long runs require very thick cables to avoid losses. High-
impedance systems reduce current, allowing the use of thinner and longer cables.
• Multiple Speakers Across Large Areas
Ideal for distributed audio (e.g., malls, schools, campuses, offices).
Each speaker has a tap setting to draw only the needed wattage.
• Simpler Infrastructure & Scalability
One amplifier can drive dozens of speakers in parallel with no complex impedance matching.
Makes zoning and volume control easier with transformers.
Note:
In the U.S., 70V audio systems are standard because they stay just under the
100V peak limit defined by safety regulations, avoiding high-voltage installation
requirements. In most other countries, 100V systems are common because local
electrical standards allow higher voltages in low-current applications. The key
advantage of 100V systems is that they deliver more power over longer distances
with thinner cables, making them ideal for large-scale distributed audio
installations.
Bekijk gratis de handleiding van Kramer CL-4P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | CL-4P |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2810 MB |
