Handleiding
Je bekijkt pagina 11 van 19
Kramer Electronics Ltd.
AW-8P – Installation Guide
9
Designing a high impedance system
Choosing the correct speaker cable is essential for reliable performance and long-term
system efficiency, especially in 70V/100V high-impedance systems where cables can span
over 100 meters.
Key Design Steps
1. Calculate Total Speaker Load - Add the wattage of all speakers on each cable run
Example: 4 × 30W = 120W total load
2. Measure Cable Run Length - Measure the full round-trip length (amplifier to last speaker
and back).
3. Select Cable Size (Gauge) - Use the following table to choose your cable size for a
maximum 0.5dB loss (≈11%):
Note: These are maximum total distances for the entire run, based on copper
cable and a 5% voltage drop.
Total
Load
Cable
Gauge
30W 90W 150W 300W
16 AWG
(1.31mm
2
)
180m / 590ft
60m / 200ft 36m / 118ft 18m / 60ft
14 AWG
(2.08mm
2
)
290m / 950ft 96m / 315ft 58m / 190ft 29m / 95ft
12 AWG
(3.31mm
2
)
460m / 1500ft 153m / 500ft 92m / 300ft 46m / 150ft
10 AWG
(5.26mm
2
)
730m / 2400ft 243m / 795ft 146m / 480ft 73m / 240ft
Bekijk gratis de handleiding van Kramer AW-8P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | AW-8P |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2789 MB |
