Kogan SmarterHome KASIPAC14YA handleiding

Airco

Kogan

40 pagina's

PDF beschikbaar

Handleiding

7. Ventilated area

Ensure that the area is in the open or that it is adequately ventilated before breaking into

the system or conducting any hot work. A degree of ventilation shall continue during the

period that the work is carried out. The ventilation should safely disperse any released

refrigerant and preferably expel it externally into the atmosphere.

8. Checks to the refrigerating equipment

Where electrical components are being changed, they shall be fit for the purpose and to the

correct specification. At all times, the manufacturer’s maintenance and service guidelines

shall be followed. If in doubt, consult the manufacturer’s technical department for

assistance.

The following checks shall be applied to installations using flammable refrigerants:

• The actual refrigerant charge is in accordance with the room size within which the

refrigerant containing parts are installed.

• The ventilation machinery and outlets are operating adequately and are not

obstructed.

• If an indirect refrigerating circuit is being used, the secondary circuit shall be checked for

the presence of refrigerant.

• Marking to the equipment continues to be visible and legible. Markings and signs that

are illegible shall be corrected.

• The refrigerating pipe and components are installed in a position where they are

unlikely to be exposed to any substance which may corrode refrigerant containing

components, unless the components are constructed of materials which are inherently

resistant to being corroded or are suitably protected against being so corroded.

9. Checks to electrical devices

Repair and maintenance to electrical components shall include initial safety checks and

component inspection procedures. If a fault exists that could compromise safety, then no

electrical supply shall be connected to the circuit until it is satisfactorily dealt with. If the

fault cannot be corrected immediately but it is necessary to continue operation, an

adequate temporary solution shall be used. This shall be reported to the owner of the

equipment, so all parties are advised.

Initial safety checks shall include:

• That the capacitor is discharged: this shall be done safely to avoid the possibility of

sparking.

• That no live electrical components and wiring are exposed while charging, recovering,

or purging the system.

• That there is continuity of earth bonding.

Bekijk gratis de handleiding van Kogan SmarterHome KASIPAC14YA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.