Kogan SmarterHome KASIPAC14YA handleiding

Airco

Kogan

40 pagina's

PDF beschikbaar

Handleiding

COOL - Cooling mode

• After switching on the appliance, the cooling mode is set as standard.

• When the cooling mode is selected, the COOL indicator lights up.

• Press the Up and Down buttons to set a temperature between 16°C and 30°C.

• Press the FAN button to set one of the speed modes HIGH, MID and LOW.

FAN - Fan mode

• After the fan mode is selected with the remote control, the wind indicator lights up.

• Press the FAN button to set one of the speed modes HIGH, MID and LOW.

• The temperature cannot be set.

DRY - Dehumidification mode

• When the dehumidification mode (DRY) is selected, the DRY indicator lights up.

• Remove the water plug, insert the water pipe (not supplied) and plug the other end into

a water tank or drain.

• In dehumidification mode, the compressor works as follows:

- The compressor starts when the room temperature is above 17°C.

- When the room temperature is 15°C or lower, the compressor shuts off.

- When the room temperature rises above 17°C, the compressor restarts automatically

after a 3-minute pause.

• In dehumidification mode, the fan automatically switches to a low speed. The fan

speed and temperature cannot be adjusted in this mode.

HEAT - Heating mode (only for Reverse Cycle unit)

• When the heating mode is selected, the HEAT indicator lights up.

• Press the Up and Down buttons to set a temperature between 16°C and 30°C.

• Press the FAN button to set one of the speed modes HIGH, MID and LOW.

OPERATION

Bekijk gratis de handleiding van Kogan SmarterHome KASIPAC14YA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.