Kogan SmarterHome KASHSAC80TA Handleiding (68 Pagina's)

Handleiding

29

Test Run

1. Turn on the power supply.

2. Press the ON/OFF button on the remote control to turn on the air conditioner.

3. Press the Mode button to switch the mode between COOL and HEAT.

In each mode set as below:

• COOL-Set the lowest temperature

• HEAT-Set the highest temperature.

4. Run for approximately 8 minutes in each mode and check all functions are properly

run and respond to the remote controller.

Functions check as recommended:

• If the outlet air temperature responds to the cool and heat mode.

• If the water drains properly from the drainage hose.

• If the louver and deflectors (optional) rotate properly.

5. Observe the test run state of the air conditioner for at least 30 minutes.

6. After a successful test run, return the normal setting and press ON/OFF button on

the remote control to turn off the unit.

7. Inform the user to read this guide carefully before use and demonstrate to the user

how to use the air conditioner, the necessary knowledge for service and

maintenance and the reminder for storage of accessories.

Note: If the ambient temperature exceeds the range, refer to section OPERATION

section. If it cannot run COOL or HEAT mode, lift the front panel and refer to the

emergency button operation to run the COOL and HEAT mode.

Bekijk gratis de handleiding van Kogan SmarterHome KASHSAC80TA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.