Kogan SmarterHome KASBLSTFANSA handleiding
Handleiding
Je bekijkt pagina 5 van 19
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi light
will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the air
conditioner in pairing mode by pressing and holding the fan button on the control panel for
5 seconds until the Wi-Fi indicator light begins flashing rapidly.
Add device through network
1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper
right corner, to add a new device through the network.
2. Select the product type from the list of options in the app (Heating & Cooling > Air
Conditioners).
3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the
app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order.
Bekijk gratis de handleiding van Kogan SmarterHome KASBLSTFANSA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | SmarterHome KASBLSTFANSA |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 1613 MB |