Kogan MX9 handleiding
Handleiding
Je bekijkt pagina 16 van 20
16
Cleaning Outlet Filter
1. On the back of the vacuum body, rotate the outlet filter cover in an anticlockwise
direction so the arrow is pointing to the unlock icon.
2. Remove the outlet filter cover from the vacuum body.
Note: If the filter is damaged or worn, it must be replaced with a new filter.
3. Separate the outlet filter from the cover and wash the filter with warm water.
4. After washing, ensure the filter is left to air dry for at least 24 hours before
reassembly.
Note: Do not use the vacuum filters without the filter installed.
5. Replace the filter cover and rotate in a clockwise direction to secure it place (arrow
is pointing to the lock icon).
Cleaning the Roller Brush
To allow for cleaning the roller can be removed from the roller brush by following the below
steps:
1. Move the lock (indicated by lock symbols) on the right side of the roller brush to the
open lock position and take out the retaining bracket.
2. Remove the roller and clean off any debris.
3. Reinstall the roller in reverse order: reinsert the retaining bracket and press it down
until it clicks back into place.
Storage
• Store the vacuum in a cool, dry place that's away from direct sunlight and inaccessible
to children and pets.
• To store the device, hang it on the wall bracket. The 2-in-1 brush and crevice tool can
be attached to the wall bracket for convenient storage.
• If the vacuum is not being used for an extended period, remove the battery from the
vacuum body and recharge it prior to the next use.
Outlet filter
Bekijk gratis de handleiding van Kogan MX9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | MX9 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 1643 MB |
