Kogan KAWWASHTL7A handleiding
Handleiding
Je bekijkt pagina 19 van 32
Preset timer (delayed washing)
This washing machine has a 0-24 hour preset function, which you can set to determine the
time when the washing program will finish. (It is, in effect, similar to a ‘delayed start’ function,
but you set the time period after which you want the wash to finish rather than to start.)
1. Put your washing in the machine, loading items uniformly in the tub.
2. Press the Power ON/OFF button.
3. Select the required Program.
4. Press the Process button until the PRESET indicator light flashes, then press the
Set button to select the desired time period (in hours) for the wash to finish.
5. Select the water level, if necessary.
6. Add any detergents.
7. Close the washer lid and press the Start/Pause button.
8. After setting the preset, the corresponding light will illuminate and all other lights
will be switched off about one minute later. From this time on until the preset time
only the Power ON/OFF and Set buttons will respond when pressed.
9. To check the preset program, press any button (except for the Power ON/OFF
button); the program will be indicated for 5 seconds. During these 5 seconds you
can press the Water Level button and set the water level.
10. To cancel the preset, shut off the power.
11. To change the preset time, first cancel the preset, then set it again.
Note:
This function is not available for the COTTON, DELICATE and QUICK programs.
To avoid water leakage when using this function, ensure the water taps are open,
the drain hose is properly installed and the washing load and detergent are properly
prepared.
Bekijk gratis de handleiding van Kogan KAWWASHTL7A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KAWWASHTL7A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2778 MB |
