Kogan KATTLWASH8A handleiding
Handleiding
Je bekijkt pagina 16 van 28
16
D. The “Delay” button
• The display shows the time remaining (in minutes) before the cycle will finish.
• Push the “Delay” button and the display will show the remaining time for the cycle to
finish (in hours). The indicator flashes to indicate that the delay function is operating.
• The delay start range is 2-24hr.
Note: Each time the button is pressed, the previously set time changes by one hour
(through a 24-hour cycle).
• Delay time is the delay till the wash finishes.
• To cancel Delay start, press the Power button.
E. The “Water Level / Temp” button
• When turned on, the default setting will be the standard procedure. Press the “Start /
Pause” button, the machine will automatically detect the amount of laundry, the water
level is set automatically.
• Press the “Water Level/Temp” button to select the desired water level based on the
load size. The indicator displays from “1 - 8”.
• When turned on, the default setting is a mix of cold and hot water. To adjust the water
temperature press and hold the “Water Level/Temp” button for 3 seconds then press
the “Temp.” button to select your desired water temperature. The indicator displays
“CH”, “C” or “H” to represent mixed cold and hot water, cold water or hot water
respectively.
• By default the rise water level is the same as the washing water level. Pressing this
button during the rinse cycle will adjust the rise water level.
F. The “Process/A Dehydration” button
• Press this button to select the desired wash processes such (soak, wash, rinse, spin,
soak-wash, wash-rinse, rinse-spin, etc.).
• Pressing and holding this button for 3 seconds will place the washing machine in
“dehydration” mode. Using this mode removes excess water from the load and can
help reduce the drying time of your laundry.
G. Child lock (3S)
Enable: With the machine running, if necessary, you can enable the child lock by pressing
and holding the “Delay” & “Program” buttons together for 3 seconds. The machine will
beep twice to confirm the child lock has been enabled. With the child lock on, any button
pressed will be invalid and the machine will beep once.
Disable: To cancel the child lock, press and hold the “Delay” & “Program” buttons
together for 3 seconds. The machine will beep twice to confirm the child lock is cancelled.
When the program ends or in the event of an error, the child lock is automatically disabled.
Bekijk gratis de handleiding van Kogan KATTLWASH8A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KATTLWASH8A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2869 MB |
