Kogan KATTLWASH8A handleiding
Handleiding
Je bekijkt pagina 14 van 28
14
5. Connect the water supply hose to
the water inlet valve on the rear of
the washing machine. Ensure
there are no kinks in the hose and
that it is not being crushed.
6. Repeat Steps 1-5 for the
remaining water supply hose.
Installation checklist
1. Water supply hose(s) are connected.
Note: Run water through the hose(s) to flush dirt, scale and other debris out of the
water lines. Doing so will help prevent future problems with clogged filter screens
and will also allow you to verify which hose is hot and which is cold.
2. Power cord is plugged into a properly grounded the electrical outlet.
3. Drain hose is mounted at the correct height.
4. Washing machine is in a suitable location, on a hard, even surface away from
direct sunlight or heat sources, e.g., radiators, cooking appliances, etc.
5. Ensure the machine is level. Adjust the legs in necessary. Any floor unevenness
may result in unstable working or abnormal noise.
CAUTION
After installing the water supply hose(s) and before starting the washing machine. Open the
taps to create water pressure and check for any leaks in the connectors on both ends. If the
pressure is too high, lower it to prevent water leakage.
WARNING:
Do not overtighten the hoses. Overtightening can damage the valves
resulting in leaking and property damage.
Bekijk gratis de handleiding van Kogan KATTLWASH8A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KATTLWASH8A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2869 MB |
