Kogan KATTLWASH8A handleiding
Handleiding
Je bekijkt pagina 12 van 28
12
Install the water supply hose
For one-touch faucet connectors, follow the steps below:
1. Loosen the upper connector
screw.
Note: If the diameter of the water
faucet is too large remove the guide
plate.
2. Push the upper connector so the
rubber seal is firmly contacting
the faucet. Then tighten the 4
screws.
Rotate the middle connector
counter-clockwise to secure it in
place.
3. Connect the water supply hose to
the middle connector, whilst
pushing the plate down.
To separate the water supply
hose from the middle connector,
ensure the faucet is closed then
pull the hose away from the
faucet whilst pushing the plate
down.
4. Ensure that the rubber o-ring is
seated inside the hose connector.
screw
Upper Connector
Rubber
seal
Middle
connector
Guide plate
Connector
Middle
Connector
Upper Connector
Rubber seal
Water supply
hose
Plate
Upper
Connector
Hose
connector
Rubber
o-ring
Bekijk gratis de handleiding van Kogan KATTLWASH8A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KATTLWASH8A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2869 MB |
