Kogan KATFWASH10B handleiding
Handleiding
Je bekijkt pagina 18 van 32
18
Operation
Before First Use
• Ensure the washing machine is properly installed before use.
• Before washing clothes for the first time, you must run a complete cycle without
laundry to remove any residual water from the manufacturer’s test run.
• To do this:
a. Connect the power source and water supply.
b. Add a small amount of detergent (approximately 10g) into the detergent drawer
and close it.
c. Press the ‘Power’ button.
d. Turn the cycle selector to select the ‘Cotton’ cycle.
e. Press the ‘Start/Pause’ button to begin the cycle.
Washing Steps
1. Connect the inlet hose and turn on the tap.
2. Insert the power plug into a properly earthed electrical outlet.
3. Position the drain hose correctly.
4. Open the door, load the laundry, then close the door. Add detergent into the
detergent compartment and close the drawer.
5. Press the ‘Power’ button to turn on the washing machine.
6. Turn the ‘Cycle Selector’ to choose the desired wash program.
7. Adjust the cycle settings such as temperature, spin speed, or other options as
needed.
8. Set the Time Delay if you want the wash cycle to finish at a later time.
9. Press ‘Start/Pause’ to begin the wash cycle.
To Change the Cycle During Operation:
1. Press ‘Start/Pause’ to stop the current operation.
2. Select a different cycle.
3. Press ‘Start/Pause’ again to start the new cycle.
Bekijk gratis de handleiding van Kogan KATFWASH10B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KATFWASH10B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2998 MB |
