Handleiding
Je bekijkt pagina 14 van 32
14
Adjusting the Direction of the Elbow
1. After loosening the elbow, adjust the elbow interface to the required direction as
required and keep the hexagonal head of the elbow motionless with a wrench.
2. Use a 9±1N.m torque wrench to tighten the black bolt of the gas inlet pipe
assembly. Ensure that the torque of the wrench is within the required range to
prevent elbow breakage or damage caused by excessive force.
3. After the installation is tightened, check whether the parts are in good condition
and test the air tightness to ensure the tightness of the installation.
Warning:
• Danger of leaks. Check the seal if any connection is handled.
• Turn off power for safety and to protect the appliance. Close the middle valve to
prevent gas leakage.
• Keep flammable materials away from the appliance. Wear gloves before starting work.
• Allow the appliance to cool down after use to prevent burns from high temperatures.
The hexagonal head of
the elbow
Tighten with a torque
wrench of 9±1N.m
The black bolt of the gas
inl
et pipe assembly
Hold still
Bekijk gratis de handleiding van Kogan KAMCTGASSSA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KAMCTGASSSA |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2825 MB |
