Handleiding
Je bekijkt pagina 11 van 21
11
Before First Use
• Allow the appliance to stand upright for at least 30 minutes before connecting it to
power.
• Clean the interior of the fridge before using the appliance for the first time.
• Do not connect the appliance to an energy-saving plug or a DC-to-AC power
converter (such as those used in solar energy systems or marine power supplies).
• It is normal for condensation or frost to form on the rear panel during compressor
operation. This will automatically defrost. The water will drain into a collection tray
above the compressor, where it will evaporate.
Operation
Display
When the appliance is powered on, the display will briefly illuminate fully for 3 seconds and
a start-up tone will sound. It will then enter normal operation mode.
During normal operation:
• If no fault is detected, the display will show the current set temperature.
• If a fault is detected, an error code will be displayed.
Note:
This appliance uses touch-sensitive controls on the glass door. Use light pressure
when operating the controls. Avoid scratching the display panel with sharp objects
and keep the appliance away from high humidity or strong magnetic fields. These
conditions may interfere with normal operation.
Light Button
Display
Temperature Up Button
Lock Button
Temperature Down Button
Bekijk gratis de handleiding van Kogan KAM66GLAFGA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KAM66GLAFGA |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1182 MB |
