Koenig HeatsBox B00145 handleiding

40 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 36 van 40
App-controlled Use
Open the HeatsBox App on your smartphone.
Select your HeatsBox and set the parameters such as target tempera-ture, heating process or
timer individually.
If the user is connected to the appliance, the LED control lamp will turn blue.
Start the heating process by selecting the eld on the app that displays the estimated time. The
heating process starts immediately, and the LED control lamp turns red.
If you have set a timer, the HeatsBox will automatically start the heat-ing process after a set
time, but not immediately. You can close the app or disconnect the bluetooth
®
* connection. The
information is stored directly on the appliance.
Check the current food temperature on your HeatsBox App.
Press the ON/OFF button to turn off the appliance after reaching the desired heating time. The
heating and the power indicator light will turn off. The LED control lamp should now light up
again in blue.
The appliance indicates that the target temperature has been reached by switching the color of
the LED control lamp to green. The device then automatically keeps your food warm at a certain
temperature for a prolonged period.
Allow the appliance to cool down before eating or handling any parts.
Disconnect the power plug and remove the lid.
Enjoy your meal.
User Hints
Evenly distribute the food in the inner dish to ensure quick heating.
For safety reasons, the heating process will stop when the lid is re-moved during use and will
automatically continue once the lid is put back on the appliance. Avoid frequent removal of lid
to check pro-gress for faster heating process.
When the heating lid is removed during a heating process, the power indicator light will start
blinking until the heating lid is put back on the appliance again. Once back on, the power
indicator light will light up normally again.
Small pieces heat faster than larger ones. The estimated heating time of the food may vary
depending on the temperature, quality, amount of contents and the degree of heating desired.
Some experimentation may be needed to determine exact heating times based on personal
preferences.
If the estimated heating time was too short, extend heating time while monitoring closely.
For safety reasons, the appliance stops heating automatically after 60 minutes. If this is not
enough time, press the ON/OFF button to start again. This can be done immediately and
without waiting time after automatic shut off.
To stop the heating process at any time: (1) press the ON/OFF button or (2) unplug the Heats-
Box, (3) remove the lid or use the App (4).
* bluetooth is a registered trademark by Bluetooth SIG, Inc., Kirkland, Washington, United States.

Bekijk gratis de handleiding van Koenig HeatsBox B00145, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKoenig
ModelHeatsBox B00145
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3986 MB