Koenic KAP 2523 handleiding
Handleiding
Je bekijkt pagina 13 van 56
13
English
Night light mode
In standby mode (switched o), the night light
can be activated by pressing the AQ button.
After pressing it once, the light is activated at
full brightness, after pressing it twice at half
brightness and after pressing it three times it
turns o again.
Cleaning and care
Caution
• Before cleaning, always let the product
come to a complete stop and disconnect it
from the mains.
• Do not use solvents or abrasives, metal
utensils or hard brushes for cleaning.
• Do not immerse the product in water or
other liquid. Do not allow water to drip on
or into the motor housing.
Fig.
6
Use a soft piece of cloth for cleaning. If
the dirt or contamination proves hard to
remove, use mild detergent.
Clean or replace the filter
Fig.
7
If the filter status indicator / button
Filter lights up, the filter must be
replaced. The filter status indicator/
button Filter lights up after 4320
hours or after approx. 6 months of
continuous operation.
Fig.
8
Remove the bottom cover at regular
intervals and pull out the filter.
Loosen the bottom cover by turning it
left in the direction of . Take o the
bottom cover. Pull out the filter. If dust
and other impurities have accumulated,
remove the filter and beat it out.
Remove the dust from the air intake.
Fig.
9
Insert the filter. Insert the bottom cover
into the opening so that the triangle
marks on the housing and on the cover
are aligned.
Push down the cover and turn it to the
right in the direction of .
Push down the Filter button for
approx. 3 seconds and the filter status
indicator LED turns o.
If the filter change is done earlier, e.g.
due to increased air pollution (smoking,
etc.), the filter status LED can also be
reset if it is not yet activated. Press
down the Filter button for approx. 3
seconds to reset.
Activation and deactivation of WiFi
Note: The standard setting of the WLAN
function is deactivated at the factory.
• Press and hold the
button for about 5
seconds to activate the WiFi function. The
Wifi symbol flashes.
• When the product is connected to the
mobile phone, the Wifi symbol lights up
steadily.
• To deactivate the WiFi function, press and
hold the button for about 5 seconds. The
Wifi symbol will turn flashing.
IM_KAP2523_241114_V04_HR.indb 13IM_KAP2523_241114_V04_HR.indb 13 15/11/2024 08:5115/11/2024 08:51
Bekijk gratis de handleiding van Koenic KAP 2523, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Koenic |
| Model | KAP 2523 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7835 MB |
