Handleiding
Je bekijkt pagina 14 van 28
Cleaning and Maintenance
2
1
2
3
3
4
4
5
7
6
6
7
5
1.Place the burner head ( 4 ) on to the burner base ( 5 ) so that the ignition safety
device (6) and the igniter (7) extend through their respective holes in the burner
head. The burner head must click into place correctly.
2.Position the burner caps ( 1,2,3 ) onto the burner head ( 4 ) so that the retaining pins
fit into their respective recesses.
■ Remove the burner caps and burner heads by pulling them upwards and away
from the top plate.
■ Soak them in hot water and a little detergent or washing up liquid.
■ After cleaning and washing them, wipe and dry them carefully. Make sure that the
flame holes are clean and completely dry.
■ Wipe the fixed parts of the burner base with a damp cloth and dry afterwards.
■ Gently wipe the ignition safety device and igniter with a well wrung out cloth and
wipe dry with a clean cloth.
■ Before placing the burners back on the top plate, make sure that the injector is not
blocked.
%851(56
ʄ5HDVVHPEOHWKH$X[LOLDU\6HPL5DSLG5DSLGDQG
7ULSOH&URZQEXUQHUVDVIROORZV
5HSODFHSDUWVLQWKHFRUUHFWRUGHUDIWHUFOHDQLQJ
'RQRWPL[XSWKHWRSDQGERWWRP
7KHORFDWLQJSLQVPXVW¿WH[DFWO\LQWRWKHQRWFKHV
14
Bekijk gratis de handleiding van Kleenmaid GCTK9012, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kleenmaid |
| Model | GCTK9012 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4518 MB |