Handleiding
Je bekijkt pagina 40 van 128
40
EN
OPERATION ITEM A
To start cooking
1. Touch the ON/OFF control. After power on, the buzzer beeps once, all displays
show “ – “ or “ – – “, indica- ting that the induction hob has entered the state
of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use. Make sure the
bottom of the pan and the surface of the cooking zone are clean and dry.
3. Select a heating zone by touching „+/-“ control, and a indicator between the
key will ash, the default po- wer setting is levels “5”. If you don’t choose a
heating zone in 1 minute, the induction hob will automatically switch off. You
will need to start again at step 1. You can modify the heat setting at any time
during cooking.
When you have nished cooking
1. Turn the cooking zone off by scrolling down „-“ to “0”. Make sure the display
show “0”.
2. Turn the whole cooktop off by touching the ON/OFF control.
3. Beware of hot surfaces! “H” will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer up to 99 minutes.
Bekijk gratis de handleiding van Klarstein Virtuosa 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Klarstein |
| Model | Virtuosa 90 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10846 MB |
