Klarstein Smart Slim handleiding

138 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 35 van 138
33
EN
INSTALLATION
CAUTION
Risk of injury! Always have the installation carried out by trained
specialist personnel to avoid electric shocks, personal injury and
damage to the device.
Note on Fitting the Oven into the Kitchen Unit
Fit the oven into the space provided in the kitchen unit; it may be tted
underneath a work top or into an upright cupboard. Fix the oven in position by
screwing into place, using the two xing holes in the frame. To locate the xing
holes, open the oven door and look inside. To allow adequate ventilation, the
measurements and distances adhered to when xing the oven.
If the oven is to work properly, the kitchen housing must be suitable.
The panels of the kitchen unit that are next to the oven must be made of a
heat resistant material.
Ensure that the glues of units that are made of veneered wood can withstand
temperatures of at least 120 °C.
Plastics or glues that cannot withstand such temperatures will melt and
deform the unit, once the oven has been lodged inside the units, electrical
parts must be completely insulated. This is a legal safety requirement.
All guards must be rmly xed into place so that it is impossible to remove
them without using special tools.
Remove the back of the kitchen unit to ensure an adequate current of air
circulates around the oven. The hob must have a rear gap of at least 45 mm.
The kitchen should be dry and have effective ventilation according to the
existing technical provisions.
Main lead behind the oven must be placed in such manner to avoid touching
the back panel of the oven because of the heat it develops during operation.
This is a built-in oven, which means that its back wall and one side wall can be
placed next to a high piece of furniture or a wall. Coating or veneer used on
tted furniture must be applied with a heat resistant adhesive ( 100°C ), This
prevents surface deformation or detachment of the coating. If you are unsure
of your furniture’s heat resistance, you should leave approximately 2 cm of
free space around the oven. The wall behind the oven should be resistant to
high temperatures. During operation, its back side can warm up to around
5Q °C above the ambient temperature.

Bekijk gratis de handleiding van Klarstein Smart Slim, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKlarstein
ModelSmart Slim
CategorieOven
TaalNederlands
Grootte9522 MB