Klarstein Masterzone 60 Hybrid Handleiding (136 Pagina's)

Handleiding

49

EN

ERROR CODES AND INSPECTION

If an abnormality comes up, the induction hob will enter the protective state

automatically and display corresponding protective codes:

Error

Message

Possible Cause What to do

No pot or pot not suitable Replace the pot;

ER03 Water or pot on the glass over the control Clean the user interface

F1E The connection between the display board

and the left mainboard is fail (the cooking

zone which indicator showing “E”)

1. Connection cable not correctly

plugged or defective.

2. Replace the mainboard.

F3E Coil temperature sensor failure. (the

cooking zone which indicator showing “E”)

Replace the coil sensor.

F4E Mainboard temperature sensor failure. (the

cooking zone which indicator showing “E”)

Replace the mainboard.

E1E Temperature sensor of the ceramic glass

plate is high

Please restart after the induction hob

cools down.

E2 E Temperature sensor of the IGBT is high Please restart after the induction hob

cools down.

E3 E Abnormal supply voltage(too high) Please inspect whether power supply

is normal. Power on after the power

supply is normal.

E4 E Abnormal supply voltage (too low) Please inspect whether power supply

is normal. Power on after the power

supply is normal.

E5 E Temperature sensor failure(the cooking

zone which indicator showing “E”)

Connection cable not correctly plugged

or assemble defective.

The above are the judgment and inspection of common failures.

Please do not disassemble the unit by yourself to avoid any dangers and damages

to the induction hob and please contact the supplier.

Bekijk gratis de handleiding van Klarstein Masterzone 60 Hybrid, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.