Klarstein Masterzone 60 Hybrid Handleiding (136 Pagina's)

Handleiding

41

EN

USE

To start cooking

1. Touch the ON/OFF key (A) for 3

secnds.

After power on, the buzzer beeps once,

all displays show “ – “, indicating that

the induction hob has entered the

state of standby mode.

2. Place a suitable pan on the cooking

zone that you wish to use.

Make sure the bottom of the pan and

the surface of the cooking zone are

clean and dry.

3. Depending on the heating zone where the pan is placed, adjust heat setting by

touching the slider regulating key(E) control.

• If you don’t choose a heat setting within 20 seconds, the induction hob will

automatically switch off. You will need to start again at step 1.

• You can modify the heat setting at any time during cooking.

If the display ashes

alternately with the heat setting this means that

• you have not placed a pan on the correct cooking zone or,

• the pan you’re using is not suitable for induction cooking or,

• the pan is too small or not properly centred on the cooking zone.

No heating takes place unless there is a suitable pan on the cooking zone.

The display will automatically turn off after 1 minutes if no suitable pan is placed

on it.

When you have nished cooking

1. Touching the slider regulating key(E) to decrease the power to “0” level.

2. Beware of hot surfaces

“H” will show which cooking zone is hot to touch. It will disappear when the

surface has cooled down to a safe temperature. It can also be used as an energy

saving function if you want to heat further pans, use the hotplate that is still hot.

Bekijk gratis de handleiding van Klarstein Masterzone 60 Hybrid, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.