Klarstein Havasia UV 6 Secret Handleiding (168 Pagina's)

Handleiding

46

EN

INSTALLATION

Preparation

• Place the appliance near a water inlet or drain and a power socket.

• Make sure that the hoses and the plug are accessible at all times.

Setting up the unit

Place the unit in the preferred location. The back should face the wall, the sides towards

the built-in cupboard or a wall. The dishwasher is equipped with a water drain that can

be directed to the right or the left to facilitate installation.

Power connection

Do not use an extension cord or adapter. Make sure that the socket is earthed and

complies with local regulations. Only connect the appliance to sockets that correspond

to the specied voltage of the appliance. If the plug does not t the socket, have it

replaced by a professional.

Attach and remove the water inlet

Use new hoses for the connection. Do not use old hoses. The water pressure must be

between 0.04-1 MPa. If the pressure is lower than this, ask a specialist company for

advice.

• Attach the inlet hose: Completely unwind the

safety inlet hose from the bracket on the back of

the appliance. Attach the screw to a ¾ inch water

tap. Turn on the water supply fully before use.

• Remove the supply hose: Close the water supply.

Unscrew the inlet hose from the water tap.

Note: Make sure the screw is tight on the tap. If you have never used the connection

before or have not used it for a long time, drain some water beforehand until clear

water comes out of the tap. This precaution ensures that the inlet valve is not clogged

or damaged by particles in the water.

Bekijk gratis de handleiding van Klarstein Havasia UV 6 Secret, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.