Handleiding
Je bekijkt pagina 55 van 144
55
EN
TROUBLESHOOTING
Problem Possible causes Possible solutions
LED does not light up
when the device is
plugged in.
No electricity in the
socket.
Check that the plug is
rmly xed to the socket
and that the socket is
working.
Failed to connect power
board and display board
Check the connection.
Power board damaged. Replace the power board.
Display board damaged. Replace the display board.
Some buttons do not
work, or LED display is
not normal.
The display board is
damaged.
Replace the display board.
The Cooking mode
indicator comes on, but
heating is not started.
High temperature of
the hob
High temperature of the
hob.
Something wrong with
the fan
Something wrong with
the fan.
Power board damaged Power board damaged.
During the operation,
the heating stops sud-
denly and the display
ashes “U”
Wrong pot type Use a suitable pan (refer
to the manual).
Pot detection circuit dam-
age, replace the power
board.
The diameter of the bot-
tom of the pot is small
Pot overheated Wait for the temperature
to return to normal.
Press the “on / off” but-
ton to restart the device.
“U” is displayed in the
heating area on the
same side (such as the
rst and second areas)
Power board and display
board connection failure
Check the connection
The communication part
of the display board is
damaged
Replace the display board.
Power board damaged Replace the power board.
Fan motor sounds
abnormal
The fan motor is
damaged
Replace fan.
Bekijk gratis de handleiding van Klarstein DualTone Hybrid, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Klarstein |
| Model | DualTone Hybrid |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 12390 MB |
