Handleiding
Je bekijkt pagina 41 van 144
41
EN
Start cooking
Touch the ON/OFF control. After power on, the
buzzer beeps once, all displays show “-” or “--”,
indicating that the induction hob has entered the
state of standby mode.
Place a suitable pan on the cooking zone that you
wish to use. Make sure the bottom of the pan and
the surface of the cooking zone are clean and dry.
When touch the heating zone selection button,
display nearby will ash “0”. The display will stop
ashing within 5 seconds after no operation, and
show the power level.
Control the power by slider touch
control.
When the heating power of any heating zone
is "0", the cooker will automatically enter the
standby state after 1 minute of no operation.
You can change the power at any time during
cooking.
If the display ashes alternately with the heat setting:
• you have not placed a pan on the correct cooking zone or,
• the pan you are using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The
display will automatically turn off after 1 minute if no suitable pan is placed on it.
Bekijk gratis de handleiding van Klarstein DualTone Hybrid, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Klarstein |
| Model | DualTone Hybrid |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 12390 MB |
