Handleiding
Je bekijkt pagina 42 van 136
42
EN
Greasing the gas valves
Over time, the gas valves may be stocked, and it is difcult to turn on/off. For this case,
should clean the inside of valve and greased it.
Kind reminder: This procedure must be performed by a technician authorized by the
manufacturer.
TROUBLESHOOTING
Problem Check to make sure that:
The burner cannot be lighted or the ame
is not uniform around the burner.
• The gas holes on the burner are not
clogged;
• All of the movable parts of burners are
xed correctly;
• There is no air ow around the
cooking surface
The ame does not keep lighting to the
burner with thermocouple
• You press the knob all the way;
• You keep pressing the knob
for enough time to activate the
thermocouple.
• The gas holes are not clogged
in the area corresponding to the
thermocouple.
The ame goes out while turning knob to
"Low" setting.
• The gas holes are not clogged.
• There is no air ow around the
cooking surface.
• The minimum has been adjusted
correctly (see the section entitled
"Minimum Regulation").
The cookware is not stable. • The bottom of the cookware is
perfectly at.
• The cookware is centred correctly on
the burner.
• The support grids have not been
inverted.
Bekijk gratis de handleiding van Klarstein Alchemist 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Klarstein |
| Model | Alchemist 4 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 13931 MB |
