Handleiding
Je bekijkt pagina 89 van 104
37
Installation of the cooker hood
EN
Requirements according to the operating modes
The installation requirements with regard to the structural
conditions depend on the desired operating mode.
The appliance can be used in one of the following
operating modes:
• Recirculation mode with return of the exhaust air into
the room through the exhaust air openings in the shaft (1)
• Exhaust air operation with air ducting to the outside
through an air duct or a permanently installed
exhaust air pipe (2)
Please also refer to the corresponding sections
under "Functionality ..."
Notes for recirculation mode
If you use the appliance as a recirculation hood,
no special structural measures or requirements are necessary.
However, please note the following:
• Before commissioning, fit the activated carbon filter supplied
and remove the air deflector from the fan motor,
as described in the corresponding section under "Cleaning ...".
Note: Be aware that the carbon filter serves to bind odors
and supplements the metal grease filter, but does not replace it!
Never use the appliance without the metal grease filter in place
to avoid the risk of fire, damage and malfunctions as a result of
grease deposits!
• The exhaust air from the hood should be able to flow away
from the hood upwards.
For under-cabinet installation, make sure that the furniture
under which the appliance is to be installed is suitable
(see "Choice of the mounting surface" and "Mounting...").
1 2
Bekijk gratis de handleiding van KKT Kolbe TEL350S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KKT Kolbe |
| Model | TEL350S |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 6965 MB |
