Handleiding
Je bekijkt pagina 97 van 120
37
Cleaning and Maintenance
EN
Replacing the activated carbon filter for recirculation mode
Activated carbon filters cannot be washed or regenerated
and must be replaced every 3-12 months, depending on the
frequency of use of your cooker hood.
To use your appliance in recirculation mode,
insert the activated carbon filter supplied
and replace it only with one of the same type
(see "Technical Data") as follows:
Fitting the activated carbon filter
• Open the front flap of the appliance and remove the
metal grease filter behind it, as described in the relevant
section of this chapter, so that the inside of the appliance
is accessible.
• Place the activated carbon filter parts on the
corresponding side of the fan motor and screw them
clockwise onto the motor housing.
• Make sure that the filter is stable and correctly positioned
so that it cannot come loose, fall down and cause noise
and damage!
• Reinsert the metal filter as described in the corresponding
section of this chapter.
Disassembling and reinserting the activated carbon filter
• To remove a used activated carbon filter,
proceed in reverse order to the installation procedure.
• Then replace it by fitting a new 2-part carbon filter of the
same type on both sides of the motor as described above.
• Dispose of both units of the activated carbon filter
properly.
6.3 Replacing or fitting/removing the activated carbon filter
3-12 m.
Bekijk gratis de handleiding van KKT Kolbe ECCO8005WM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KKT Kolbe |
| Model | ECCO8005WM |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 8209 MB |
