Handleiding
Je bekijkt pagina 87 van 120
27
Operation, Setting and Use
EN
Setting the switch-off timer (automatic run-on)
• If you touch the timer key during operation,
the switch-off timer is activated.
The key symbol flashes and the 3-minute countdown
of the automatic run-on begins.
Once this time has elapsed, the appliance
switches off automatically accompanied by a beep.
• To deactivate the switch-off timer before the run-on time has elapsed,
touch the timer key again.
Adjusting the lighting
The lighting can be set independently of fan operation,
however the appliance must be switched on.
Proceed as follows for this:
• Ensure that the on/off key is illuminated
(standby or operating status, see corresponding section).
• Briefly touch the light key once each time
to switch between the available lighting modes
in the following order:
Work light (white) + RGB lighting > work light (white)
> RGB lighting > off
The RGB lighting lights up in the set light colour
or white during commissioning.
To set the colour of the RGB lighting, proceed as follows:
• Touch the light key and the timer key simultaneously
until the light of the fan key starts to flash.
The device is now in setting mode for the light colour
of the RGB lighting.
• Briefly touch the fan key once each time
to switch between the available RGB lighting colours
in the following order:
white
>
red
>
green
> blue
> yellow
> purple
> orange
> cyan
> grass green
• When you have reached the desired colour,
touch the light key and the timer key again simultaneously
to confirm and accept the setting.
The RGB lighting now lights up in the set light colour.
Bekijk gratis de handleiding van KKT Kolbe ECCO8005WM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KKT Kolbe |
| Model | ECCO8005WM |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 8209 MB |
