KitchenAid KUID318SPS handleiding
Handleiding
Je bekijkt pagina 20 van 48
20
7. Replace the top and bottom end caps into the door. Fix the
bottom end cap using screw through the bottom metal bracket
hole.
Auxiliary Grille Installation
The auxiliary grille is an optional part that can be used to align the
toe grille with the rest of the cabinets (while not obstructing
ventilation of the ice maker).
Tools required:
� TORX
✝
T20 screwdriver
� 1/8" straight drill bit and power drill
1. First, complete all installation steps and install leveled ice
maker into the cabinet. Ensure ice maker is flush with the
adjacent cabinets.
2. Unpack kit by removing outer cushion packaging and
discarding packaging material.
3. Remove screws that are taped onto the inside of the auxiliary
grille.
4. Place grille onto cabinetry. Align part so that grating pattern on
the auxiliary grille matches that of the toe grille on the ice
maker.
5. Center auxiliary grille on cutout for ice maker. Mark hole
locations on each side of auxiliary grille on cabinet.
✝TORX is trademark of Acument Intellectual Properties, LLC.
6. Using power drill and a 1/8" drill bit, drill holes in cabinet. This
is to fit screws of size #8–18 x 0.750.
7. Using the TORX T20 screwdriver, screw auxiliary grille onto
cabinet.
NOTE: For future service of ice maker, auxiliary kit must be
removed prior to the removal of the ice maker from the
cabinets.
Ice Maker Installation Checklist
Bekijk gratis de handleiding van KitchenAid KUID318SPS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KitchenAid |
| Model | KUID318SPS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8496 MB |
