Kinderkraft Sienna 2 handleiding
Handleiding
Je bekijkt pagina 16 van 56
16
Child seat mode: This product is intended for children from 24 up to 60 months old,
SEATING FOR CHILDREN
WARNING!
• DO NOT place this product near a window as it can be used as a step by the child
and cause the child to fall out of window
• Be aware of the risk of open fires and other sources of strong heat in the vicinity of
the product
• DO NOT place this product near a window where cords from blinds or curtains
could strangle a child
• All assembly fittings should always be tightened properly
• not to use seating if any part is broken, torn or missing and use only spare parts
approved by the manufacturer
• the restraint system shall be removed/hidden/covered when the product is used as
a seating
• weighing a maximum of 20 kg, who are able to sit up unaided.
B. Main parts (Figure 1-13)
C. Assembly and adjustment of a high char
The assembly of the chair should be started by screwing together the elements of the lower part of the leg
(4) and the upper part of the leg (3) (Figure A). Each part of the leg is marked with the appropriate number
- match them appropriately. Then connect the entire leg to the washer (5) by screwing it in such a way that
there is no clearance between the washer and the leg (Figure B). The next step is the attachment of legs to
the seat (1). Insert the legs into holes located at the bottom of the seat in such a way that the screws
located in the legs are properly aligned with the holes for the mounting screws (Figure C). NOTE! Legs with
holes in the element 3 must be located on the front of the chair. Next to, use the screws (7) and the Allen
key (9) to fix the legs (Figure D). Screw the footrest (6) to the front of the chair with the use of the screws
(8). Attach the plastic tray (2) to the chair with the use of a latching mechanism. NOTE! In order to
disassemble the tray, tilt the latch on one side and pull the tray up, then repeat actions from the other
side. In order to fasten seat belts, attach shoulder and lap belts to each other, and then clip them to the
crotch belt buckle. NOTE! The use of belts is necessary to ensure your child's safety. Using the tray
without other elements will not support your child properly. Always use seat belts. The belts are
adjustable. A correctly folded chair is presented in Figure E. ATTENTION! The tray is not adjustable.
1.
2.
3.
4.
5.
6.
7.
Seat with straps and a securing element
Tray
Upper part of the leg p16-x4
Lower part of the leg p16-x4
Foot pad p16-x4
Footrest
Screw M6*20 x8
8.
9.
10.
11.
12.
13.
Screw M5*24 x2
Allen key
Phillips screwdriver
Plug
Plastic insert
Buckles with straps
Bekijk gratis de handleiding van Kinderkraft Sienna 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kinderkraft |
| Model | Sienna 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9531 MB |
