Kindercraft JOY² handleiding
Handleiding
Je bekijkt pagina 27 van 80
27
List of baby cot elements:
1. Frame
2. Mattress base
3. Suspended floor*
4. Suspended floor brackets x4*
5. Bag
6. Changing top*
7. Skids to secure the changing table x2*
8. Panel with baskets and fastening hooks (x2)*
9. Toy bar with 3 plush mascots*
*Items available only in the model with accessories.
1.
Assembly of the bed:
Unzip the bag and take the bed out of the bag. Separate velcro fasteners on the mattrass base (2). Take out the bed
and other elements of the set. In order to unfold the frame (1), place it appropriately - wheels down (Figure A), move
the corners apart in order to grasp middle elements of sides, and then pull shorter sides up (sharply) to lock them
(Figure B). Grasp middle elements of longer sides and pull them (firmly) until they lock (Figure C). Then press down
on the center part of the bed’s bottom – facing it down (Figure D). The frame will fully unload and the bed will be
locked (Figure E).
NOTE: Make sure that all four center elements of the bed’s sides are locked!
The side locking mechanisms will not
work when the bottom part of the bed will be laid flat. Therefore, when locking the sides, the central part of the bottom
must be raised. When the suspended floor (3) is not installed, install it with the zip fastener (Figure F) and secure with
the clamp (Figure G). Place support tubes (4) into holes in the suspended floor (Figures H and I), and then place the
mattress base (2) inside the bed (Figure J).
NOTE: For safety purposes, attach straps under the base – starting from
the opening of the entrance (open the entrance in order to fasten the straps under the floor (Figures K and L)) and
ending on the opposite side.
To facilitate the installation of the opposite side, it is recommended to partially unclip the
zipper around the suspended floor (Figure M), and then insert the straps into holes and attach to velcro straps under
the floor (Figures N and O). Fasten the zipper around the floor and lock it by clipping it into the buckle (Figure P).
2.
Installation of accessories*:
Changing table
Place mounting skids (7) into the changing table’s frame (6) until the locking button inserts the frame (Figures R and S).
NOTE: To facilitate the installation of the skids, unfasten corners on the changing table’s velcro tabs, and after
mounting the frame, close all clips.
Place the changing table by pressing it (firmly) to the bed’s frame until it slides
completely to sides (Figure T). Plastic buckles located on the cover with pockets should be placed over the bed’s frame
(Figure U).
Panel with baskets and hooks for fixing
Insert hooks into the panel’s holes (8), and then hook them onto the bed’s frame (Figures W and X).
Bed handle bar
Place the handle bar (9) in the swivel head in the direction of the arrow. Then turn it 180° counterclockwise (Figures Y
and Z). Then attach it to the base of the bar by positioning it in the direction of the arrow and turning counterclockwise
(Figure AA). Install mascot holders and then hang toys on them (Figures AB and AC). Place the bar on one of four sides
on the frame mounting mechanism (Figure AD).
NOTE: To avoid dropping the bar on your child, make sure that the
handle bar with toys is properly mounted and stable on the frame!
3. Baby cot functions*:
Wheel lock:
The baby cot has a wheel lock. To lock the wheels press the brake lever. To unlock lift the brake lever
(FIG.AE).
Base adjustment:
The baby cot has base height adjustment. To lower the base unclip the zip fastener buckle and open
the zip fastener inside the baby cot along with the base placed inside the baby cot (FIG. AF and AG). In theext step
detach the straps from the floor and place the folding base in the baby cot (FIG. AH and AI).
NOTE: To ensure security,
attach the straps located under the base (FIG. AJ).
When the base is at the lowest level, you can use the side entrance
(FIG. AK).
4.
Toy bar function*:
Bekijk gratis de handleiding van Kindercraft JOY², stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kindercraft |
| Model | JOY² |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12299 MB |
