Kiloview RN-40 handleiding
Handleiding
Je bekijkt pagina 29 van 32
Copyright © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
N40 for NDI·USER MANUAL V2.0
27
9 System Settings
9.1 User Management
You can add and delete users, modify the user password and so on.
9.2 Quick Reset
"Quick reset" is used to reset the coding service. It is usually applied after the parameters
modifications to take effect immediately or abnormal encoding/ decoding. It takes about 3
seconds and current coding service will be interrupted.
9.3 Reboot
“Reboot” is used to restart device software, it takes about 1 minute.
9.4 Restore Factory Settings
If the device can’t work properly after parameters modification (typical case is after
modifying the IP address which makes network not accessible to the device), you can restore
the factory settings to restore the device configuration to the default parameters.
Two Ways of Restore Factory Settings:
1) In Web page, select “System Setup”> “Restore” .
2）RESET Button: Press the reset button at the bottom of the device and hold the for
more than 5 seconds. The device will be restored to the factory settings. Restoring the
factory settings will lead to a hard reboot and the reboot process will take
Bekijk gratis de handleiding van Kiloview RN-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | RN-40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6742 MB |
