Kiloview RN-40 handleiding
Handleiding
Je bekijkt pagina 26 van 32
Copyright © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
N40 for NDI·USER MANUAL V2.0
24
8.3 Decoding Parameters Setting
“Current decoding output” will display the information of the current decoding NDI source
name, channel name, resolution/refresh rate, audio parameters, source IP address, real time
bit rate and frame rate and so on.
If the current decoding source is disconnected, a warming notice will be displayed at the
up-right corner showing the device is offline.
Click on the right, you can configure the output parameters. The resolution of
decoding output will be the same as that of the source. Frame rate and audio sample rate
can be set accordingly.
8.4 Discovery service
NDI discovery server can replace NDI auto discovery with server. All NDI sources are
registered with server in a centralized way, and the receiving end obtains NDI source from
the server. Through this, the device can also send the output video stream to the receiving
end of the cross-network segment.
Bekijk gratis de handleiding van Kiloview RN-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | RN-40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6742 MB |
