Kiloview P3 Mini handleiding
Handleiding
Je bekijkt pagina 43 van 48
Copyright@2024 KILOVIEW Electronics Co., LTD
P3 5G Wireless Bonding Encoder·User Manual
39
10.5 PTZ Settings
10.5.1 Enable PTZ Control Function
Equipment supports PTZ camera control via serial port or IP network.
Before using PTZ control, you need to enable the PTZ control switch in "Settings" -> "PTZ Settings ".
Figure 51 Settings - PTZ Settings Section
10.5.2 PTZ Function Settings
The device supports control of PTZ cameras using Sony Visca, Pelco-D, and Pelco-P protocols.
For serial-based PTZ control, connect the USB to RS232/RS422/RS485 converter (cable) to the encoder's USB port. After
the device recognizes the serial port correctly, select "Serial" in PTZ type, and corresponding options for "Serial Device"
will be added. After configuring the correct serial connection parameters and PTZ control protocol, operation is possible.
Figure 52 Settings - PTZ Serial Control Parameter Settings
For network protocol-based PTZ control, select "Network PTZ" in PTZ settings and configure the correct network
connection parameters and PTZ control protocol.
Note
The selection of location and region is solely for time zone configuration convenience and does not imply any political
stance.
Bekijk gratis de handleiding van Kiloview P3 Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | P3 Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8497 MB |
