Kiloview P3 Mini handleiding
Handleiding
Je bekijkt pagina 20 van 48
Copyright@2024 KILOVIEW Electronics Co., LTD
P3 5G Wireless Bonding Encoder·User Manual
16
Figure 14 Wi-Fi settings interface
Select the desired Wi-Fi hotspot, input the Wi-Fi connection password in the popup window, and click "Apply" to connect.
For more network configuration needs, settings such as automatic connection and IP address acquisition can be adjusted
on this page (as shown in Figure 15).
Wi-Fi Settings Parameters:
⚫ Auto Connect: Enables automatic connection to the Wi-Fi hotspot when detected.
⚫ BSSID (Basic Service Set Identifier): The unique identifier of the connected hotspot, BSSID is a physical address
composed of 6 bytes. This parameter cannot be configured and is used solely to distinguish different AP.
⚫ Encryption Methods: The P3 Mini supports connecting to Wi-Fi hotspots using encryption methods such as WPA,
WPA-PSK, WPA2, and WPA2-PSK. Currently, most routers use WPA2 encryption. Explanation: WPA (Wi-Fi Protected
Access) provides data encryption and authentication through TKIP (Temporal Key Integrity Protocol). WPA2 offers
enhanced security with the more robust AES (Advanced Encryption Standard) encryption algorithm. WPA-
PSK/WPA2-PSK are pre-shared key versions of these standards, commonly used in home or small office network
environments.
Note: Please select the appropriate encryption method to ensure effective Wi-Fi connectivity.
⚫ Password: Wi-Fi hotspot password.
⚫ IP Configuration: Supports automatic or manual IP settings.
Bekijk gratis de handleiding van Kiloview P3 Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | P3 Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8497 MB |
