Kiloview P3 Mini handleiding
Handleiding
Je bekijkt pagina 18 van 48
Copyright@2024 KILOVIEW Electronics Co., LTD
P3 5G Wireless Bonding Encoder·User Manual
14
Figure 11 LCD Settings - System settings interface
6.6.2.2 Firmware Upgrade and Factory Reset
Firmware Upgrade: Clicking "Upgrade" updates the firmware (software) of the P3 Mini device. New firmware releases provide enhancements
in functionality, performance optimization, and bug fixes.
Insert a USB flash drive containing the P3 Mini firmware update (firmware must be placed in the root directory of the USB flash drive), click
"Firmware Upgrade", and the system will automatically search for the latest valid firmware version in the root directory of the USB flash
drive and proceed with the upgrade automatically.
Note: To prevent upgrade failures, insert the USB flash drive into a computer before upgrading, delete unnecessary upgrade packages, keep
only the latest complete and correctly named upgrade package, and ensure it meets the device upgrade version requirements.
After the firmware update, the system will prompt for restart. Click OK to restart the device for the upgrade. Please wait patiently for the
device to restart.
Restore factory settings: Factory reset restores the device to its initial state when it leaves the factory. Factory reset clears all device
configuration information, but successfully upgraded firmware will remain. To change firmware versions, use the firmware upgrade function
to update earlier versions of firmware.
Simply click "Restore factory settings" on the system settings tab page to perform the factory reset operation on the device.
For more information on firmware upgrade and factory reset, refer to section 10.7.
6.6.3 Network
The P3 Mini main unit supports Ethernet, Wi-Fi, 4G/5G, and allows bonding communication via Wi-Fi and 4G/5G modules.
Navigate to ‘System -> Network’ in the main menu to configure Ethernet, Wi-Fi, and 4G/5G network interface parameters.
Note:
⚫ During the upgrade process, do not power off the device to avoid startup issues.
⚫ When using a USB flash drive for firmware upgrade, ensure the file system format is FAT/FAT32/exFAT.
⚫ The upgrade process takes approximately 3-5 minutes. If the upgrade prompt does not appear after 5
minutes, try restarting the device. If the device fails to start normally, contact technical support.
Bekijk gratis de handleiding van Kiloview P3 Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | P3 Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8497 MB |
