Kiloview N60 handleiding
Handleiding
Je bekijkt pagina 10 van 47
N60 for NDI·USER MANUAL V1.6
Copyright © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
9
2 User guide
Installation and Connection
Connect the power and video input source correctly, power on the device.
Network Connection and Configuration
The easiest way for network connection is to connect the device to the network by wire, automatically
obtain the IP address and DNS from the network without any setting on the device. After that, use
NewTek Studio Monitor and connect the NDI stream of the device, click the gear button ( ) in the
lower right corner of the software interface,you can directly open the login link without manually
entering the URL(The default username and password is “admin/admin”). (For the first login or the first
login after restoring the factory settings, you will need to agree to the “EULA” that pops up. Otherwise,
the NDI stream service of the device cannot be used normally).
The default username and password is “admin/admin”
NDI Streaming
NDI has the function of automatic discovery. After the device is connected to the network, other NDI
enabled tools (such as Newtek Studio monitor, OBS, vMix) can automatically discover the device and
pull the NDI stream directly.
NDI Decoding
To find the NDI source in the same LAN or manually adding the source across the network and decode
the corresponding source to the display.
Bekijk gratis de handleiding van Kiloview N60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | N60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12443 MB |
