Kichler Verdi handleiding
Handleiding
Je bekijkt pagina 9 van 60
INSTALLATION OF SAFETY SUPPORT
(required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from falling,
please install it as follows.
Step 1. Drive a wood screw and washers into the side of the brace that holds the
outlet box. Leave 3mm (1/8") of space between the support brace and the washer.
(Fig. 11)
Step 2.Insert the safety cable through the mounting bracket and one of the holes
in the outlet box into the ceiling. Adjust the length of the safety cable to reach the
screw and washers by pulling the extra cable through the cable clamp until the
overall length is correct, put the end of the cable back through the cable clamp,
forming a loop at the end of the cable. Tighten the cable clamp securely. Now, put
the loop in the end of the safety cable over the wood screw and under the washer.
Tighten the wood screw securely. (Fig. 12)
NOTE: Although the safety support cable is required for Canadian installations
only. It’s a good idea to make the attachment with any installation.
Flat Washer
Wood Screw
Spring Washer
Outlet Box
Ceiling
Support Brace
Safety Cable
Bolt
Wood Screw
Fig. 12
Fig. 11
56" Verdi LED | 9
Bekijk gratis de handleiding van Kichler Verdi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Verdi |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4707 MB |
