Kichler Rise handleiding
Handleiding
Je bekijkt pagina 18 van 64
18 | KICHLER.COM
Fig.26
OPERATING INSTRUCTION
Press the power button “ ”once to turn ON (or OFF) the fan. (Fig. 26)
To set the desired fan speed, press and hold the “ ” button to decrease and
increase the speed. (Fig. 26)
To turn the light on and o, press and release the light “ ” button. To set the light
intensity, press and hold the light button. The light will turn on at the light intensity
previously selected. (Fig. 26)
SENSORLESS DC CONTROL PAIRING PROCEDURES
IMPORTANT: Ceiling fan blades MUST be installed before pairing procedure can begin.
Step 1. Press the power button “ ” to turn o the wall control (the button will be up). Restore electricity to the ceiling fan branch
circuit at the circuit breaker or fuse box. Within 60 seconds of turning on the power, press the “ ” power button to turn on the wall
control (the button will be down) and then press the “ ” reverse button for 3 to 5 seconds. The light will flash twice, and at the same
time, the fan will run for a while and then stop. The remote will now be programmed to your fan and ready for use.
IMPORTANT: Do not press any buttons on the remote until after the pairing process is complete. Wait until after the fan has come to a
complete stop.
Step 2. Try dierent speed settings on the wall control to ensure the fan is now fully functional. If programming is unsuccessful, retry the
process starting from step 1 again.
Indication Light
(Power)
Airflow Direction
Light Button
Fan Speed Button
Power Button
Bekijk gratis de handleiding van Kichler Rise, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Rise |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 5152 MB |
