Kichler Maeve handleiding
Handleiding
Je bekijkt pagina 8 van 60
8 | KICHLER.COM
HANGING THE FAN (continued)
Step 4. Carefully feed fan wires and safety cable up through the downrod.
Thread the downrod onto the motor coupling until the clevis pin holes are
aligned. Next, replace the clevis pin and hairpin, then tighten both set screws.
(Fig. 8)
Step 5. Slip the coupling cover, canopy hole cover and canopy onto the
downrod. Carefully reinstall the hanger ball onto the downrod. Make sure the
cross pin is in the correct position and the set screw is tight and the wires are
not twisted. (Fig. 9)
Step 6. Now lift the motor body into position and place the hanger ball into
the mounting bracket. Rotate until the “Check Tab” has dropped into the
“Registration Slot” and seats firmly. (Fig. 10) The entire motor body should
not rotate if this is done correctly.
WARNING: Failure to properly seat the “Check Tab” can damage the ceiling
fan during operation.
Fig. 8
Fig. 9
Fig. 10
Clevis Pin
Hairpin
Set Screw
Set Screw
Cross Pin
Hanger Ball
Canopy
Hole Cover
Coupling Cover
Mounting Bracket
Hanger Ball
Registration
Slot
Check Tab
Clevis Pin
Hairpin
Set Screw
Canopy
Bekijk gratis de handleiding van Kichler Maeve, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Maeve |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4738 MB |
