Kichler Humble handleiding
Handleiding
Je bekijkt pagina 17 van 66
CONTROL SYSTEM SET-UP
Step 1. After installation is complete, press the “LEARN” button for 3 seconds
within 30 seconds after AC power is turned on. Fan will turn on at medium speed
and light (if installed) will turn on. This confirms that the “SMART SYNC” setting
is active and ok. (Fig. 21)
Step 2. If you cannot finish the setting within the 30 seconds time frame, the
main power must be turned o and re-started again. This will repeat step 1 until
the “LEARN” feature is activated as indicated.
OPERATING INSTRUCTIONS
Restore power to ceiling fan and test for proper operation (Fig. 22)
1. Fan Control: To start the fan, press the selected speed button to run the fan
at the desired speed: “HI”-high speed; “MED”-medium speed; “LOW”-low
speed; Press the “FAN OFF” button to turn o the fan.
2. Light button: Press once to turn the light on or o. Continuous pressure on
the light button dims light in a continuous cycle from light to dark, or dark to
light.
3. “REV” button: Controls fan direction, forward or reverse.
4. If your ceiling fan has fluorescent lighting, please slide the switch to “O”
position. If the ceiling fan has incandescent or halogen lighting or LED, please
slide the switch to “D” position.
Fig. 21
60" Humble | 17
Bekijk gratis de handleiding van Kichler Humble, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Humble |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4363 MB |
