Kichler Guardian handleiding
Handleiding
Je bekijkt pagina 8 van 64
8 | KICHLER.COM
Step 4. Carefully feed fan wires and safety cable up through the downrod.
Thread the downrod onto the motor coupling until the clevis pin holes
are aligned. Next, replace the clevis pin and hairpin, then tighten both set
screws. (Fig. 8)
Step 5. Slip the coupling cover, canopy hole cover and canopy onto the
downrod. Carefully reinstall the hanger ball onto the downrod. Make sure
the cross pin is in the correct position and the set screw is tight and the
wires are not twisted . ( Fig. 9)
CAUTION: Ensure all screws are tight before moving to the next step.
HANGING THE MOTOR ASSEMBLY (continued)
Motor
Coupling
Cross Pin
Fig. 8
Fig. 9
Hairpin
Clevis Pin
Set Screw
Hanger Ball
Canopy
Canopy Hole Cover
Coupling Cover
Downrod
Bekijk gratis de handleiding van Kichler Guardian, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Guardian |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 5752 MB |
