Kichler Almere handleiding
Handleiding
Je bekijkt pagina 9 van 57
56” Almere | 9
Step 4. Carefully feed fan wires and safety cable up through the
downrod. Thread the downrod onto the motor coupling until the clevis
pin holes are aligned. Next, replace the clevis pin and hairpin, then tighten
both set screws. (Fig. 10)
Step 5. Slip the coupling cover, canopy hole cover and canopy onto the
downrod. Carefully reinstall the hanger ball onto the downrod. Make sure
the cross pin is in the correct position and the set screw is tight and the
wires are not twisted . ( Fig. 11)
CAUTION: Ensure all screws are tight before moving to the next step.
HANGING THE FAN (continued)
Motor Coupling
Downrod
Cross Pin
Set Screw
Hairpin
Clevis Pin
Set Screw
Fig. 10
Fig.11
Canopy
Hanger Ball
Canopy Hole Cover
Coupling Cover
Downrod
Bekijk gratis de handleiding van Kichler Almere, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Almere |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4417 MB |
