Kichler Almere handleiding
Handleiding
Je bekijkt pagina 12 van 57
12 | KICHLER.COM
ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock, be sure you have turned o the power
at the main circuit panel before wiring.
Follow the steps below to connect the fan to your household wiring. Use the wire
connectors supplied with your fan. Secure the connector with electrical tape. Make
sure there are no loose wire stands or connections.
WARNING: If your house wires are dierent colors than referenced in this manual,
stop immediately. A professional electrician is recommended to determine proper
wiring.
Step 1. Insert the receiver into the mounting bracket, with the flat side facing up toward
the ceiling. (Fig. 15)
Step 2. Connect wires using the connectors as shown in WIRE DIAGRAM. (Fig.16)
WARNING: Check to see that all connections are tight, including ground, and that no
bare wire is visible at the wire connections.
Step 3. After the connections have been made, they should be turned upward and
pushed carefully up into the outlet box. The wires should be spread apart with the
grounded conductor (white wires) and the equipment-grounding conductor (green or
bare copper wires) on one side of the outlet box and the ungrounded conductor (black
wires) on the other side of the outlet box.
Fig. 15
Mounting Bracket
Receiver
Bekijk gratis de handleiding van Kichler Almere, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Almere |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4417 MB |
