Handleiding
Je bekijkt pagina 26 van 32
1. TO TURN UNIT ON OR OFF:
Press POWER button to turn unit on or off.
Wireless button
Press and hold on the POWER button for 3 seconds to initiate the Wireless connection mode.
2. FLASHCOOL FUNCTION:
4. TO CHANGE TEMPERATURE SETTING:
Press UP/DOWN button to change temperature setting.
3. TO ADJUST FAN SPEEDS:
Electronic control operating instructions
5. TO SELECT THE OPERATING MODE:
Press this button to initiate the FlashCool function.
FlashCool provides maximum cooling and sets the fan to the highest speed. The unit will operate in this
mode until change mode, adjust fan speed or the function is turned off. The unit will then return to normal
cooling operation with the fan speed set to high.
NOTE: The FlashCool function will turn off when the mode or fan speed are adjusted.
Press Fan button to select the Fan Speed in four steps-Auto, Low, Med or High. Each time the button
is pressed, the fan speed mode is shifted. For some models, the fan speed can’t be adjusted.
NOTE: Press or hold either UP or DOWN button until the desired temperature is shown on the display.
This temperature will be automatically maintained anywhere between 60°F (16°C ) and 86°F (30°C).
If you want the display to read the actual room temperature, see“ To Operate on Fan Only ’’section.
To choose operating mode, press Mode button. Each time you press the button, a mode is
selected in a sequence that goes from Auto, Cool, Dry ,heat (cooling only models without) and
Fan. The indicator light beside will be illuminated and remained on once the mode is selected. The
unit will initiate automatically the Energy Saver function under Cool, Dry, Auto (only Auto-Cooling
and Auto-Fan) modes.
To operate on COOL mode :
• Choose Cool Mode to set the cooling function. Use the Up and Down buttons to choose the desired tem-
perature. When Cool Mode is selected, the fan speed can be adjusted by pressing the fan button.
To operate on HEAT mode (cooling only models without) :
• Choose Heat Mode to set the heating function. Use the Up and Down buttons to choose the desired
temperature .When heat Mode is selected, the fan speed can be adjusted by pressing the fan button.
NOTE: For some models, the fan speed can not be adjusted under HEAT mode.
To operate on Auto feature:
• When you set the air conditioner in AUTO mode, it will automatically select cooling, heating (cooling only
models without) , or fan only operation depending on what temperature you have selected and the room
temperature.
• The air conditioner will control room temperature automatically round the temperature point set by you.
• In this mode, the fan speed cannot be adjusted, it starts automatically at a speed according to the room
temperature.
24
Bekijk gratis de handleiding van Keystone KSTAW081WA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Keystone |
| Model | KSTAW081WA |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2644 MB |
